(a)Acentimeter-sized preform is assembled by stacking indium wires
surrounded by Zeonex29 (a polymer with low absorption at terahertz
frequencies) into a hollow polymethyl methacrylate (PMMA) tube. This is
heated and drawn to fiber, forming a tapered transition region where the
polymer is viscous and the metal is liquid. The end product is a fiber
containing a long continuous array of metal microwires. The fiber can be
cut into a large number of smaller length devices. (b) Top-view
photograph of the preform cross-section. Scale bar: 10 mm. (c)
Photograph and (d) X-ray CT scan of the taper used in this work. Scale
bar: 8 mm. (e) × 10 (scale bar: 1 mm) and (f) × 40 (scale bar: 50 μm)
magnified microscope image of a metamaterial fiber cross-section. (g)
Typical side view of the straight fiber section, showing wire continuity
and good uniformity over the length scales considered. Scale bar:
500 μm. Alessandro Tuniz, et all.
Researchers from the University of Sidney have developed a
metamaterial lens that has ten times the resolution of any current lens.
A lens with ten times the resolution of any current lens, making it a
powerful new tool for the biological sciences has been developed by
researchers at the University of Sydney.
“This advance means we can unlock previously inaccessible information
on the structure of molecules, their chemical make-up and the presence
of certain proteins,” said Alessandro Tuniz, lead author of an article on the lens published in Nature Communications today.
Tuniz, a postdoctoral associate at the University, said, “This opens
up an entirely new tool for biological studies. It could allow earlier
skin cancer diagnosis, because smaller melanomas can be recognized. For
breast cancer, it can also be used to more accurately check that all
traces of a tumor have been cut out during surgery.”
The four member research team from the University’s School of
Physics, including Alessandro Tuniz, are all authors on the paper. They
created the lens using fiber optic manufacturing technology.
The lens is a metamaterial – a material with completely new properties not found in nature.
Making the lens was not a matter of making a better form of the
lenses already in existence but of making a lens which uses light waves
in a way not previously possible.
“Creating metamaterials is a cutting-edge area of science with a
massive range of potential uses from aerospace to solar power,
telecommunications to defense,” said researcher Dr Boris Kuhlmey.
“The major challenge is making these materials on a scale that is
useful. This is one of the first times a metamaterial with a real world
application, quickly able to be realized, has been feasible. Within the
next two to three years, new terahertz microscopes that are ten times
more powerful than current ones will be possible using our metamaterial.
“We know of only two or three other cases worldwide, including for
wireless internet and MRI applications, where metamaterials could also
be put into practice in the next couple of years.”
The potential to create a new high power lens, able to see much finer
details than using conventional lenses was spotted almost a decade ago.
It has taken until now to make the lens on a useful scale, a thousand
times smaller than the early experimental models.
“The difficulty was making large quantities of matter structured on a micrometric scale,” said Alessandro Tuniz.
The new lens, made of plastic and metal, uses terahertz waves,
electromagnetic waves with frequencies higher than microwaves but lower
than infrared radiation and visible light. It operates in a region of
the spectrum where very few other optical tools are available and all of
them have limitations, in particular in terms of resolution.
“If we think of this in comparison to an X-ray which allows us to see
inside objects at a high resolution but with associated danger from
radiation, by contrast our metamaterial lens allows us not only to see
through some opaque materials, but also to gather information on their
chemical composition, and even information on interaction between
certain molecules, without the danger of X-rays,” Tuniz said.
This means the lens is perfectly suited to analyzing the delivery of drugs to cells, which is crucial to medical research.
This research was undertaken with the Freiburg Materials Research
Center from the University of Freiburg and supported by the Australian
Research Council, and the Australian National Fabrication Facility using
commonwealth and NSW government funding.
ليست هناك تعليقات:
إرسال تعليق